Report Header is Printing over the Logo in Strata Master
For the set up of a Logo refer this article - Strata Master Custom Headers (Logos)
An excerpt from the article is below.
An example of an Overlap
The Causes and Resolution of the Overlap
- The logo is of an incorrect size, in that the area coloured black/yellow needs to be kept free for the report headers. . Refer to the article linked above for the correct sizing of the logo.
- The Name of the Report is Very Long and exceeds the 766 pixels allowed for this purpose, as in the example above. Go to Configure > Terminology and shorten the report name in the Local term field.
Summary
The logo needs to be created, be the correct size, and provide 766 x 116 pixels allowance for report headers.
The header name needs to fit within the 766 pixels allowance.
Should you review the above points and still have an overlap, please log a case with Strata Master Support.